Description
The Sportsman Ultra Light HD™ .36 is a lightweight, affordable suppressors designed by hunters for hunters. Full 17-4 Stainless Steel construction brings a new paradigm of durability to the Sportsman Ultra Light family of suppressors, hence the HD (High Durability) designation. Tubeless laser-welding, a silencer technology pioneered by Griffin, affords near-titanium weights using much more durable 17-4 H900 heat-treated stainless steel.
The original Sportsman Ultra Light Suppressors were aluminum in construction, and had to be relegated to sporting use only allowing a handful of rounds to be fired in quick succession then allowed to cool. The Sportsman Ultra Light HD™ series does away with these restrictions, providing of peace of mind to hunters knowing their suppressor can handle whatever they throw at it. This added durability allows end users to dial in their hunting rifles without needing to break for suppressor cooling, as was the case with the previous, aluminum Sportsman suppressors.
Sportsman Ultra Light HD™ suppressors feature Griffin’s patented ECO-FLOW™ baffle technology to minimize user exposure to toxic gases, and decrease system gas to allow better functioning on gas-operated hosts. Industry-standard 1.375×24 HUB threading allows users to utilize any HUB mount adapters from Griffin as well as other manufacturer’s mounting systems if desired. This .36cal (9mm) suppressor can also accept Nielson devices (booster housings) to be run on 9mm Browning-style tilt-barrel pistols.
Sportsman Ultra Light HD™ suppressors are machined in Griffin’s Watertown, Wisconsin facility by freedom loving Americans.
This suppressor is compatible with Griffin and other manufacturer’s 1.375×24 HUB mount adapters, and booster housings for use on tilt-barrel pistols.
NOTE: Sportsman Ultra Light HD™ Suppressors DO NOT COME WITH A MUZZLE DEVICE. However, the 1.375×24 to 5/8×24, 1.375×24 to 1/2×28, and PLAN-A Short adapters are free add-on options when purchased via the To Your Door Program. Silencers Shipped to a chosen dealer will automatically receive the 5/8×24 Direct Thread adapter. Muzzle Devices for optional mounting systems must be purchased separately.
MOUNTING OPTIONS AVAILABLE:
Sportsman Ultra Light HD™ Suppressors are HUB-compatible with any of Griffin’s 1.375×24 HUB Interfaces, as well as many other manufacturer’s inserts. Customer may choose which mounting system they prefer when they order. Direct Thread Inserts, if chosen, are free with any Sportsman HD™ Suppressor. Upgraded mounting interfaces may be chosen for an additional cost, or purchased separately.
- Direct Thread HUB Adapter (5/8×24 or 1/2×28) – FREE with To Your Door Orders! (5/8×24 included with silencers transferred to a dealer)
- PLAN-A™ Short Taper Mount HUB Adapter – FREE with To Your Door Orders!
Compatible with the following Taper Mount devices ONLY: EZ-Brake™ & Minimalist Brake. For use with longer Taper Mount Devices, please choose the Plan-A™ LONG HUB Mount Adapter
Compatible with the following Taper Mount devices ONLY: Hammer Comp, Paladin Brake, Minimalist Stealth Flash Suppressor, Bayonet Micro Brake, EZ-Brake™, & Minimalist Brake.
Compatible with most mil-spec Colt-pattern A2 birdcages & ALL GATE-LOK™ Muzzle Devices (Excluding: GATE-LOK™ Stealth Flash Hider)
Compatible with most mil-spec Colt-pattern A2 birdcages & ALL GATE-LOK™ Muzzle Devices
Compatible with ALL DUAL-LOK® Muzzle Devices (Excluding: Over-the-Barrel PSR™ Muzzle Devices & Bayonet Flash Hider)
MAINTENANCE ITEMS AVAILABLE:
- Bushwhacker® Spanner Wrench
- Griffin GI Armorers Wrench
- Mount Adapter Driver
- Cleaning Brushes
- ST-3 Thread Sealant
- High Temp 2300 degree Anti Seize
- Alignment Rods (to verify proper installation)
WHAT’S IN THE BOX?
- Sportsman Ultra Light HD .36 Suppressor
- Choice of HUB Mount Interface if Ordered To Your Door (5/8×24 included as standard otherwise)
- Branded Griffin pouch
CALIBER RATING :
The Sportsman Ultra Light HD™ .36 suppressor is rated up to .338 LM and 9mm pistol cartridges.
Sportsman Ultra Light HD™ suppressors do not have minimum barrel length restrictions or constraints for magnum rifle calibers. While longer barrels promote longer service life, there are no barrel length restrictions with this suppressor!
SPECS :
|
Diameter: |
1.5″ |
|
Overall Length: |
6.09″ (Suppressor Only) |
|
Weight: |
10.4 oz (Suppressor Only) |
|
Materials: |
High strength, high temperature, corrosion resistant 17-4PH Stainless Steel |
|
Attachment: |
1.375×24 Industry-Standard HUB Threading |
|
DB Rating: |
-36.1 dB (134.7 dB on 20″ Tikka 7.62x51mm 175 gr) |
|
Finish: |
High Temp Cerakote |
|
Full Auto Rated: |
Yes (60 rounds, then allow to cool to ambient temp) |
FEATURES :
- Industry-Standard 1.375×24 HUB Rear Threading
- Full 17-4 H900 Heat-Treated Stainless Steel Construction
- Tubeless Laser-Welded Design
- Patented ECO-FLOW™ baffle system for reduced gas blow back
- Choice of HUB adapter (DT inserts included at no extra cost)
- High-Temp Cerakote Finish
- Available in Black or FDE
- Perpetual Lifetime Warranty™
Manual
- CLICK HERE FOR MANUAL
Reviews
There are no reviews yet.