AIS™ Spacer Plate

Description

The AIS™ Spacer Plate is positioned between the optic ring of a GPM™ Mount and the AIS™ Mounting Plate to elevate smaller backup optics to provide a clear sight picture over the top of oversized scope turrets, such as those on our 1-10×28 MIL-R Riflescope.

To use this spacer plate, install it to the GPM™ Ring Top by lining up the built-in dowel pins with the pinholes in the ring top. Then, using the longer screws supplied with this space plate instead of the shorter screws included with our AIS™ Plates, install and tighten the AIS™ Mounting Plate by threading the screws through the pass-through holes in the Spacer and ensuring the dowel pins on the AIS™ Mounting Plate interface with the pinholes on the Spacer Plate. Tighten everything down and you are ready to mount your backup optic, delivered unto greater heights.

FEATURES

• Raises Backup Optics for Clear Picture Over Large Turrets
• Dowel Pin Alignment Interface
• Minimalist & Lightweight Solution (only adds 0.2 oz)
• 6061-T6 Aluminum
• Made in the USA

WHAT’S INCLUDED

• AIS™ Spacer Plate
• (2) T-15 Torx Extended Mounting Screws
  • Use these screws in place of the screws that come with your purchased AIS™ Plate