1.375X24 Hub Direct Thread Adapter
Perfect piece of kit to adapt the can to more hosts. It works well on everything I used it on so far. No POI shift on two .22 cal pistols, a .22 rifle and a .17 rifle. Used on a Bushwhacker 46 with 22 end cap.
The 1.375x24 HUB Direct Thread Adapter provides a direct thread interface for the Griffin Bushwhacker®, OMEGA™, NOMAD™, & other 1.375x24 threaded suppressors. Wrench flats make it equally simple to attach or remove from the suppressor tube body or your firearm's muzzle threads. No proprietary tools required. Available in 1/2x28 and 5/8x24. While it is convenient to have direct thread suppressor capability that can move from host to host without the need for additional muzzle devices, it is important to remember that each host firearm must be checked for baffle alignment via visual inspection before firing.
The 1/2x28 Insert can be used with cartridges up to 9mm and the 5/8x24 can be used up to .45 caliber.
Perfect piece of kit to adapt the can to more hosts. It works well on everything I used it on so far. No POI shift on two .22 cal pistols, a .22 rifle and a .17 rifle. Used on a Bushwhacker 46 with 22 end cap.
It fit my ruger American ranch perfectly.
Fine workmanship and very speedy delivery
Workmanship is awesome. Griffin Armament product come from people who depend on these kind items to save lives! Very good craftsmanship!
This universal adapter works well on my Optimus Micro for 22LR. It adds about 1/2” to the overall set up vs the direct thread rear end-cap. I would prefer an Optimus Micro specific adapter that recesses the female portion of the interface deeper inside the main tube and utilizes the internal taper. Overall, a solid product with a simple, solid lock up.
