Description
The 1.375×24 HUB Direct Thread Adapter provides a direct thread interface for the Griffin Bushwhacker®, OMEGA™, NOMAD™, & other 1.375×24 threaded suppressors. Wrench flats make it equally simple to attach or remove from the suppressor tube body or your firearm’s muzzle threads. No proprietary tools required. Available in 1/2×28 and 5/8×24. While it is convenient to have direct thread suppressor capability that can move from host to host without the need for additional muzzle devices, it is important to remember that each host firearm must be checked for baffle alignment via visual inspection before firing.
The 1/2×28 Insert can be used with cartridges up to 9mm and the 5/8×24 can be used up to .45 caliber.
- 17-4 PH SS Billet Machined
- Black Nitrided
- 1.8 Ounce Weight
- Wrench Flats for every contingency
- Multi-Thread versatility for 1.375×24 threaded suppressors
Ross –
This universal adapter works well on my Optimus Micro for 22LR. It adds about 1/2” to the overall set up vs the direct thread rear end-cap. I would prefer an Optimus Micro specific adapter that recesses the female portion of the interface deeper inside the main tube and utilizes the internal taper. Overall, a solid product with a simple, solid lock up.
Brian –
Workmanship is awesome. Griffin Armament product come from people who depend on these kind items to save lives! Very good craftsmanship!
Birch Knoll Gun Shop; LLC –
Fine workmanship and very speedy delivery
Mark Hayes –
It fit my ruger American ranch perfectly.
Jake M. –
Perfect piece of kit to adapt the can to more hosts. It works well on everything I used it on so far. No POI shift on two .22 cal pistols, a .22 rifle and a .17 rifle. Used on a Bushwhacker 46 with 22 end cap.
Chad Monroe –
I have a Huxwrx 7.62 Ti suppressor, the fit was perfect. It looks really good on the can. I’m very impressed with the Machining fit and finish. Price with shipping was great.