EZ-LOK™ Barrel Adapters

MSRP:
Was:
Now: $54.95
(You save )
(36 reviews) Write a Review

The EZ-LOK™ is our new patent pending, separate eco-system, separately available, simplified, universal Rapid Index™, piston system. EZ-LOK™ is comprised of two parts, the piston, and the barrel adapter. This product page is for the barrel adapter (smaller black component pictured). This product was intended to provide a simple solution with zero training or familiarity requirement for customers. CAM-LOK® is our original and still higher performance, patent pending product in the pistol silencer piston mount product class that Griffin Armament created.

The Griffin Armament EZ-LOK™ interface affords the user the ability to convert the suppressor to a much faster and more secure mounting solution on browning style action (tilt barrel) pistols vs it's legacy technology, single piece, direct thread piston counterparts. Direct thread single piece pistons have several negative attributes. They do not accept tools, and are hand tightened to the host firearm. As a result of hand installation, they loosen when the piston system reciprocates under slide cycling during the firing sequence. This vibration and inadvertent loosening of pistol silencers, requires end users to constantly check tighten pistol silencers. This periodically causes users to have "bad range days" with unforeseen baffle strikes and end cap strikes. These unfortunate events cause logistically burdensome work for consumers to communicate with service departments, ship products back and forth, and sometimes assume charges for repair for these issues.

No longer do users need to worry about their pistol suppressors loosening during use (as with traditional fixed direct thread pistons). The EZ-LOK™ interface supports a 3/4" socket wrench for installation with prevailing torque, and features a taper locking system, which encourages secure attachment, despite the piston still actuating for and aft during the firing sequence. The piston can be attached / detached in one single mounting orientation, simplifying the system to something anyone who can screw in a lightbulb can immediately grasp.  Additionally, the manufacturing accuracy of the interface is held to Griffin Armament's high quality standards for squareness, and concentricity, ensuring that each mounting position has similar and minimal POI shift influence. To support this, the mating pistons and EZ-LOK™ direct thread adapters have all mating diameters and interfacing geometry qualified in a single operation, for tool quality accuracy and perfection. A similar manufacturing theory was applied to the barrel adapter for maximum alignment accuracy.

End users benefit from being able to attach their silencer to various adapter interfaced host firearms, without having to disassemble the suppressor and change the piston to a different thread pitch.  The piston is "universal"; accommodating any pistol mounted with a EZ-LOK™ barrel adapter. Additionally, end users with different brand suppressors supported by the EZ-LOK™ piston family, will be able to benefit from the interchangeability of EZ-LOK™ barrel adapters between EZ-LOK™ piston models. This adapter also acts as a thread protector for the more expensive barrel's threads which when used with fixed pistons, are traditionally exposed.

9mm versions are shorter, .45 caliber versions feature an extended cylinder to attach to the larger diameter barrels.

Installation & Use Notes  : Suppressor should be tightly assembled when using this product to avoid inadvertent disassembly of the suppressor when removing it from barrel adapter. Barrel adapters should be installed to their host firearms with a minimum torque rating of 22 ft/lbs using a 3/4 socket and needle type torque wrench.  Use of a box end wrench will not have optimal contact with the wrench flat geometry on the adapter and may damage the adapter.

CAM-LOK® requires suppressor attachment with minimum 22inch lbs of force.  EZ-LOK™ requires suppressor attachment with minimum 13.75inch lbs of force.  With both systems, a slight squish should be felt during tightening and indicates tapers are engaged (locked), and required installation torque has been met.

For the fastest system, choose CAM-LOK®.  For the the most simple system, choose EZ-LOK™.

Features :

  • Patent Pending EZ-LOK™ universal QD piston attachment system
  • 1 Mounting orientation, for simple mounting in approximately 4-5 seconds
  • Internal taper surface locks in place with interfacing barrel adapters and drastically reduces or eliminates common baffle/end cap strikes
  • Compatible with Universal QD pistons barrel adapters (sold separately)
  • Total system weight is identical to legacy direct thread pistons
  • H900 heat treated for improved durability and wear resistance
  • 17-4 stainless steel material
  • QPQ Nitride finish for attractive, durable black finish

*NOTE*

1/2x28: Indexes off the barrel shoulder. For use on standard, sub compact, compact, and full-size tilt-barrel firearms that have a normal profile of barrel (G19, G17, P320, S&W M&P 2.0).

1/2x28 Special: Indexes off the face of the muzzle. For use on micro compact tilt barrel firearms with little to no barrel shoulder due to the thinner profile of the barrel (G43, G43x, G48, P365, P365XL, Hellcat).

 If you are concerned about fitment, the 1/2x28 special will work on a normal profile barrel as well. It will operate the same, but if you have a longer threaded surface on your barrel, you may see uncovered threads rearward of the muzzle device when using this option.

1/2x28 SMG/PCC: Made specifically for SMG’s and PCC’s (Sub Machine Guns and Pistol Caliber Carbines) that have the industry standard length of threads commonly found on carbines: 0.625.”

Glock Gen 4 or Gen 5 users: It is reported the barrel adapter may touch your guide rod when the slide reciprocates. We have not been able to replicate in house using CAM-LOK®/EZ-LOK™ barrel adapters with Glock Gen 4/5 recoil spring assemblies. However, the items below allow your Glock® Gen 4/5 to work with a Glock® Gen 3 recoil spring assembly that does not have this reported issue.

LONE WOLF GEN4 GUIDE ROD ADAPTER-BLACK

LONE WOLF GUIDE ROD COMPLETE ASSEMBLY GEN 1-3

SKU:
GAEZL
Caliber:
9mm
Caliber:
.40 cal
Caliber:
.45 cal
Thread Pitch:
1/2x28
Thread Pitch:
1/2x28 Special
Thread Pitch:
1/2x28 SMG/PCC
Thread Pitch:
5/8x24
Thread Pitch:
9/16x24
Thread Pitch:
.578x28
Thread Pitch:
13.5x1mm LH
Thread Pitch:
16x1mm LH
Thread Pitch:
16x1mm RH
Attachment System:
EZ-LOK™
Type of Part:
Barrel Adapter

36 Reviews

  • 5
    EZ lovk

    Published by Damon raimondi on 5th Aug 2024

    Outstanding adapter

  • 5
    Ezlok

    Published by Unknown on 27th Jul 2024

    I purchased the Ezlok Special to fix the barrel thread issues with the PSA AKV.

  • 5
    EZ Lok master race

    Published by Unknown on 9th Jul 2024

    Great lockup on pistol and rimfire cans. No concentricity issues across 3 firearms and two suppressors. Direct thread is nice, but not ruining the threads on your barrel or mount is peace of mind for almost no added length and a minimal amount of added weight.

  • 5
    Ezlok

    Published by Drake Meaux on 26th Jun 2024

    Worked as it should, only had trouble on my bull barreled rifle because there wasnt enough material for the socket to grab on

  • 5
    SMG45

    Published by Travis on 24th Jun 2024

    I picked this up to run my Obsidian45 on a new SMG45 and I can't be happier. I shot 150 rounds through the gun, two mags dumped, and at the end the suppressor was even more secure than when I started because of mild carbon locking XD 100% recommend this product.

  • 5
    EZ Lok Barrel Adapter

    Published by Stephen F Merz on 25th May 2024

    Such a great way to multifunction a suppressor when you have two weapons with different barrel end threads.

  • 4
    EZ-LOK ADAPTERS

    Published by Daniel Simpson on 29th Apr 2024

    I switched to EZ-LOK from CAM LOK. I had issues with the CAM LOKs over rotating. Reasonable quick on and off, holds can solid , have not had any come loose.

  • 5
    Shit just works

    Published by Benjamin Webb on 25th Apr 2024

    Not too much to say, shit just works. Can locks up tight, doesn't work itself loose, but is faster than direct-thread

  • 5
    Awesome

    Published by Jeffrey Wilent on 12th Apr 2024

    Installed one on my Walther PPQ, and I am going to be using one on my Marlin 1894 with a fixed barrel mount on my silencer. Really nice option!

  • 5
    EZ-LOK Barrel Adapter

    Published by AF on 2nd Apr 2024

    Great for quick attaching suppressor to multiple firearms.