AIS™ Flat Mount Plate - Trijicon RMR / SRO / Holosun HE507C / HS407C / HS508C

MSRP:
Was:
Now: $69.95
(You save )
(1 review) Write a Review
Griffin RMR mount flat plate optic plate for trijicon optics red dot with pinholes for better alignment

AIS™ Flat plates are made specifically and only for Griffin's GPM™ product family of optics mounts.  Flat plates allow users to position both secondary, non-magnified optics and other accessories adjacent to their primary day optics for ease of use. The Flat accessory plates can be mounted on all 5 sides of the GPM™ optic mounts to provide the user with the most flexibility available on the market.   The flat plates are a subset of the Griffin AIS™ (Accessory Interface Suite). This updated style features pinholes for guaranteed alignment and increased rigidity of your preferred optic.

Common applications for flat plates:

  • Mounting of RAPTAR & Simrad @ 12 o'clock
  • Mounting secondary reflex optics on shooters side of GPM™ mounts for bolt gun use in bipod prone positions
  • Providing elevated gas mask compatible height secondary optics on host firearm
  • Mounting Picatinny accessories such as ACI's, data cards, Kestrels, Bubble levels, etc
  • Mounting IR Lasers, rangefinders, flashlights, etc on firearms without other mounting support

Flat Plates Feature :

  • The AIS™ (Accessory Interface Suite) allows users to mount to GPM™
  • Dowel-Pin Alignment Interface
  • 5 sided interfacing for left and right handed users
  • Low profile for tight fitment of the secondary optic against the scope mount
  • Mounting screws - 8/40x7/16 (.430" OAL) T-15 TORX #6
  • Tapered pins included
  • Type 3 mil-spec hardcoat anodizing
  • Lifetime Warranty
  • 6061 T6 aluminum
  • Made in the USA
SKU:
GSMA-RMR-FP
Width:
1.00 (in)
Height:
0.25 (in)
Depth:
1.50 (in)

1 Review

  • 5
    AIS RMR Mount

    Published by James V on 22nd Dec 2023

    I bought this for my SPRM scope mount. I was not sure how it mounted and what the pins were for. I couldn't find instructions or even photos of it. However, it is very simple to install. It attaches to the pre-threaded holes of the SPRM. The pins fit in holes that are predrilled in the SPRM. The pins are tapered and only fit in one directions. The need to be driven in place and flush with the top of the RMR mount. Not a lot of force is needed and I used a flat punch to drive them flush. The pins ensure the mount will not get knocked out of alignment. My Holosun fitted on without any issues. The fit, finish and precision are very good. It is a good product.

RELATED PRODUCTS